Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

cancel

Power Supplies

Active filters

  • Palmer WT PB 40 - Powerbar - Power Supply with 8 Outputs for Pedalbay 40

    €191.88

    Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight centre-negative outputs and two switchable outputs of 9, 12 or 18 volts for added flexibility. Optimum performance is provided by a total current of 2,000 mA. The best thing: no more forgotten power supplies or unnecessary cable clutter on-stage means no more stress.

  • Palmer BATPACK 8000 - Rechargeable Pedalboard Power Supply, 8000mAh

    €153.75

    The Palmer BATPACK is purpose-designed for guitar and bass players to provide ultra-quiet power to pedalboards and high current draw stompboxes. Utilizing advantageous lithium polymer battery technology and specially designed active filtering circuitry, they are absolutely free from buzz, hiss or whine unlike lesser power bank designs. The BATPACK comes in a rugged low-profile aluminium enclosure and delivers 500 mA each from electrically separated and regulated 9 volt DC centre negative barrel outputs. It features short circuit protection, 5-segment battery status indication and a convenient type A USB port for charging smartphones or tablets. A charger is included.

  • Palmer PWT 04 - Universal Pedalboard Power Supply 4-Outputs

    €94.71

    The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.

  • Palmer PURIFIER - Power Conditioner

    €29.52

    Designed especially for the use with effect pedals and pedalboards, the Purifier minimizes and removes noise induced by poor DC power adapter construction delivering clean DC power to your stompboxes. It provides standard 2.1 x 5.5 mm barrel jack connectors and automatically detects your DC power supply's polarity. The Purifier cleans any output voltage from 5 to 30 volts DC.

  • Palmer PW 9 V - Standard 9 V Power Pack

    €18.45

    Power supply for all Palmer devices with a 9 V input connector and a maximum power consumption of 500 mA.

  • Palmer BATPACK 4000 - Rechargeable Pedalboard Power Supply, 400 0mAh

    €116.85

    The Palmer BATPACK is purpose-designed for guitar and bass players to provide ultra-quiet power to pedalboards and high current draw stompboxes. Utilizing advantageous lithium polymer battery technology and specially designed active filtering circuitry, they are absolutely free from buzz, hiss or whine unlike lesser power bank designs. The BATPACK comes in a rugged low-profile aluminium enclosure and delivers 500 mA each from electrically separated and regulated 9 volt DC centre negative barrel outputs. It features short circuit protection, 5-segment battery status indication and a convenient type A USB port for charging smartphones or tablets. A charger is included.

  • Palmer PWT 12 MK 2 - Universal 12-Outlet Pedalboard Power Supply

    €217.71

    The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 isolated 9 V DC, centre-negative female pin-connector outputs. Four of the outputs feature adjustable voltage from 9 to 18 volts. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.

  • Palmer PWT 08 - Universal 9V Pedalboard Power Supply 8 Outputs

    €159.90

    The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.

  • Palmer PWT 05 MK 2 - Universal 9V Pedalboard Power Supply 5 Outputs

    €138.99

    With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.

    The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.

  • Palmer PWC 6 - Power Distribution Cable for up to 6 Devices

    €7.38

    With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.

  • Adam Hall Stands SLED PS USB - Universal 5 V Power Adapter USB/DC (DC Plug)

    €7.38

    Universal power supply including a USB to DC (DC Plug) cable 1.35 x 3.5 mm.