Lighting Stands

Gravity TLS 431 B - Touring-Lighting Stand with Square Steel Base

ADAM_GTLS431B

€243.54

Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the...

Stands and Tripod Accessories

Gravity LS SUPER TB 01 - Super mini T-Bar for 35 mm tripods

ADAM_GLSSUPERTB01

€73.80

If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this,...

Lighting Stands

Gravity LS TBTV 28 - Lighting Stand with T-Bar, Large

ADAM_GLSTBTV28

€124.23

The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins...

Lighting Stands

Gravity LS TBTV 17 - Lighting Stand with T-Bar, Small

ADAM_GLSTBTV17

€76.26

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins...

Lighting Stands

Gravity LS TB 01 - Universal T-Bar for 35 mm Stands

ADAM_GLSTB01

€29.52

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

Lighting Stands

Gravity LS 331 B - Lighting Stand with Square Steel Base

ADAM_GLS331B

€189.42

The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.

Lighting Stands

Gravity LS 431 B - Lighting Stand with square steel base and excentric mounting option

ADAM_GLS431B

€218.94

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Lighting Stands

Gravity LS FLOORX B - Floor Stand for Spots, Foldable

ADAM_GLSFLOORXB

€15.38

The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage, hefty rubber feet prevent marring of the floor while providing a secure grip.

Steel

Adam Hall Stands SWU 400 T - Wind up stand with T-Bar black

ADAM_SWU400T

€292.74

The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.The sturdy steel construction has a black powder-coated finish; the...

Lighting Stands

Adam Hall Stands SWU 375 - Wind up stand black

ADAM_SWU375

€651.90

Matte black multipurpose wind up stand The TÜV-certified SWU375 is a professional wind up stand for mobile and stationary use. Its crank mechanism permits convenient raising and lowering; the maximum height is 3.75 m. Thanks to its steel-cored rubber feet, the SWU375 is especially stable and stays put even on smooth surfaces. One of the three legs is...

Lighting Stands

Adam Hall Stands SLTS 09 - Lighting Stand medium

ADAM_SLTS09

€82.66

Medium lighting stand with crossbeam Including set of 4 screws with washer, safety disc and wing nuts

Lighting Stands

Adam Hall Stands SLTS 017 E - Lighting Stand large with TV Spigot Adapter

ADAM_SLTS017E

€102.09

Lighting Stand large with holding fixture for 28 mm TV Spigot

Lighting Stands

Adam Hall Stands SLTS 017 CB - Lighting Stand T-Bar with 28 mm TV Spigot

ADAM_SLTS017CB

€29.52

This square T-bar fits onto all lighting stands with 28 mm sockets and is a direct replacement for our AH-Stand SLTS017. It features 4 fixture mounting points and holds up to 45 kg evenly distributed. The 123 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Lighting Stands

Adam Hall Stands SLTS 017 - Lighting Stand large with TV Spigot Adapter

ADAM_SLTS017

€120.29

Large lighting stand with crossbar and TV spigot adaptors (length 123 cm). Including set of 4 screws with washer, safety disc and wing nuts

Lighting Stands

Adam Hall Stands SLS 6 CB - Lighting Stand T-Bar with 17 mm TV Spigot

ADAM_SLS6CB

€11.56

This square T-bar fits onto all lighting stands with 17 mm sockets and is a direct replacement for our AH-Stand SLS6. It features 4 fixture mounting points and holds up to 25 kg evenly distributed. The 92 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Lighting Stands

Adam Hall Stands SLS 6 - Lighting Stand

ADAM_SLS6

€59.04

Lightweight lighting stand with crossbeam and 2-stage boom arm Including set of 4 screws with washer, safety disc and wing nuts

Lighting Stands

Adam Hall Accessories 38163 - Floor and Wall Mounting Plate for all PAR16/36/56/64 PAR...

ADAM_38163

€13.31

Floor and wall mounting plate for all PAR16/36/56/64 Flood and Spotlights. Easy to use with bolt and butterfly nut through center mounting hole. Three mounting holes ( Ø 5 mm) to fix the plate to the wall or floor if required. Simple, elegant and inexpensive method for mounting PAR cans!- Including suitable bolt M8 x 35 and butterfly nut

Showing 1-17 of 17 item(s)