Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series telescopic boom microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. Theboom has an adjustment range of 51 to 88 cm. The screw-on counterweight has a specially designed locking nut for microphone clips. The solid metal knobs are unlosable, to ensure that the stands withstand the rigours of the road for longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy and extremely quick via the easy-grip, triangular tightening sleeve.

Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. The solid metal knobs are unlosable, to ensure that the stands survive the hard conditions of touring longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy, with incredibly quick tightening of the easy-grip, triangular tightening sleeve.

The MS 4212 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features convenient 1-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4212 B sports a smooth, durable clutch with threaded handle. The ergonomic knob and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4212 B, additional ring packs are available in a wide array of colours for instant personalization.

This table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Thick rubber covering the whole circumference of the base isolates it from the table and helps to minimise unwanted noise.

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colors for instant personalization.

The MS 43 is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

For easy height adjustment the MS 43 sports a smooth, durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 43, additional ring packs are available in a wide array of colours for instant personalization.

The MS 2322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 2322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2322 B, additional ring packs are available in a wide array of colours for instant personalization.

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.

The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.

To extend the stand's height and increase stability, additional XLR goosenecks (item no. GMAGOOSEMXLR) and a weight disc (item no. GMS2WP) are available as accessories.

The MS 23 is a premium-quality microphone stand with thick walled tubing, white powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

For smooth, durable height adjustment, the MS 23’s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible – patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the MS 23; more ring packs are available in a wide array of colours for instant personalization.

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4321 B, additional ring packs are available in a wide array of colors for instant personalization.