Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

cancel

Stands

Active filters

    • New

    Gravity KSX 2 RD - Set with keyboard stand X-Form double and rapid desk

    €109.47

    Especially on tour it is important that all instruments, equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity Rapid Desk Set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus, this combination works in pretty much every situation, no matter if you're playing in the studio or practicing in the rehearsal room.

    Measuring 100 cm wide and 48 cm deep, its large table surface provides you with plenty of room to arrange your laptop, DJ mixer, controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight, whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool.

    In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.

  • Gravity FD SEAT 1 - Round Musicians Stool Foldable, Adjustable Height

    €99.63

    For musicians, long rehearsals or recording sessions usually mean sitting for hours on end. Whether playing the drums or other instruments. A flexible and comfortable seat provides more endurance and a better atmosphere for everyone.

    The FD SEAT 1 from Gravity is a round musician's chair for universal use: In the studio, on stage, in the rehearsal room or at home practicing. For drummers, guitarists, bassists, pianists, strings or wind instruments. It boasts special characteristics typical of Gravity. On the one hand, the functionality of the seat: In contrast to most current models from other manufacturers, it is not only made of leather/ imitation leather or fabric, but of a mix of materials. This ensures that the seat surface is breathable at the right places, significantly increasing comfort. In addition, this mix gives the FD SEAT 1 an unmistakable and appealing design that sets it apart from the crowd.

    A second highlight is the ingenious height adjustment: It is based on a threaded rod, but with a certain twist. For fine adjustment, simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments, however, the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves! And thirdly, the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability.

  • Adam Hall Stands SPS 023 SET 4 - Set of 2 Speaker Stands with Bag and 2 Speaker Cables 6.3 mm Jack

    €107.01

    Speaker Stand Set with Transportbag and Speaker Cables - Set composed of 2 x black aluminium speaker stands (SPS023), one transport bag and 2 Speaker Cables 6.3 mm Jack.

  • Gravity TMS 4322 B - Touring series Tripod Mic Stand with Telescope Boom

    €98.40

    Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series telescopic boom microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. Theboom has an adjustment range of 51 to 88 cm. The screw-on counterweight has a specially designed locking nut for microphone clips. The solid metal knobs are unlosable, to ensure that the stands withstand the rigours of the road for longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy and extremely quick via the easy-grip, triangular tightening sleeve.

  • Gravity TSP 5212 LB - Touring series Steel Speaker Stand with Auto Lockpin

    €95.94

    The hard conditions and extreme time pressures of touring are for strong workers and robust materials only - such as the Gravity Touring series speaker stand. Extremely sturdy, with three double-braced legs and a die-cast aluminium mounting bracket. Especially strong steel tubing for a 50 kg load capacity. Set-up and take-down are extremely quick and safe thanks to the automatic, snap-in LockPin®. The 35 mm extension pole is locked into place and the pin can only be unlocked with the release lever. The loudspeaker stand can be adjusted to a height of up to 194 cm. The locking screws, with solid, unlosable metal knobs, are an invaluable advantage when touring.

  • Gravity KS LTS 2 T - Utility Shelf for Second Tier Keyboard Stand Add-Ons

    €51.66

    This steel shelf is designed to be placed on second tier keyboard stand add-ons providing a flat surface for tabletop synthesizers, laptops, controllers, drum machines, effect pedals and more. It features a front lip to prevent items from falling off while two convenient 3/8 screws in the rear corners allow you to mount microphone clips, goosenecks or boom arms. The utility shelf's left and right edges are bent down 90° adding rigidity, and two handle cutouts provide easy portability.

    "
  • Gravity TMS 4321 B - Touring series Tripod Mic Stand Standard Boom

    €83.64

    Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. The solid metal knobs are unlosable, to ensure that the stands survive the hard conditions of touring longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy, with incredibly quick tightening of the easy-grip, triangular tightening sleeve.

  • Gravity MS 4212 B - Short Microphone Stand with Folding Tripod Base and 1-Point Adjustment Telescoping Boom

    €57.81

    The MS 4212 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

    The boom hub features convenient 1-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4212 B sports a smooth, durable clutch with threaded handle. The ergonomic knob and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

    A set of black coding rings is included with the MS 4212 B, additional ring packs are available in a wide array of colours for instant personalization.

  • Gravity SS 5211 B SET 2 - Set of 2 Speaker Stands with Bag and 2 Standard Speaker Cables, 5 m

    €198.03

    This set includes two Gravity GSP5211B tripod speaker stands, the padded heavy duty GBGSS2B carry bag for convenient, easy transport and two 5 m standard 1.5 mm² speaker cables with standard speaker compatible 2-pole plugs.

  • Adam Hall Stands SKT 17 - Folding Keyboard Bench With Extra Thick Padding

    €62.73

    The SKT 17 is an ultra comfortable single X brace keyboard bench with a 52 x 24 cm high density foam padded seating area and adjustable height from 49 to 58 cm. The durable construction is made of black powder coated heavy duty steel. The legs feature non-slip rubber ends and fold completely flat for easy transport and space saving storage.

  • LD Systems SAT WMB 10 W - Wall Mount for Speakers white

    €36.90

    Wall & ceiling bracket for loudspeaker systems up to 10 kg

    The LDSATWMB10 is fully adjustable on all axes and can therefore be individually aligned. It is compatible with all SAT G2 speakers and Dave 8 satellites, but is also suitable for direct installation in the wood or plastic housing of other speakers.

    It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.

    Note:

    Under the statutory provisions (BGV C1 § 7 Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.

    "